APS CPS100 Series Single Phase Programmable AC and DC Power Sources

PROGRAMMABLE AC AND DC POWER SOURCES

The CPS100 Series programmable AC and DC output power sources are versatile sources of power for development, test and production applications requiring single phase AC or DC output. Parallel, Series and 3-Phase Master/Slave mode provides higher power, voltage and 3-phase application support.

 

This series consists of 14 models from 600VA/W to 5000VA/W per unit. All models use digital signal processing (DSP) based power conversion technology for optimal performance and efficiency. These units are excellent source for 50, 60, 400 or 360 ~ 800 Hertz for export and aerospace product testing or testing of DC powered equipment.

The CPS100 Series programmable AC and DC output power sources are easy to use instruments which provide precisely controlled frequency and voltage conversion. On standard CPS100S models, the frequency can be adjusted from 15 to 1000 Hertz for applications such as the testing of military/avionics equipment or for the operation of 400 0r 800 Hertz electronics that are on board an aircraft or a military vessel. The adjustable frequency band in conjunction with the dual voltage ranges of 0-150 volt or 0-300 volt (or 320 volt below 200Hz on 2kVA to 5kVA models) as well as DC test capability provides full capabilities for testing and operating electronics deployed worldwide.   Setup and operation of the CFS100 Series is easy. The large color touch sensitive LCD display, menu soft keys and simple front panel controls allows users to vary voltage and frequency using a shuttle or by entering a value directly using the touch screen or decimal keypad. The LCD displays readouts for frequency, voltage, current, peak current, crest factor, power, apparent power and power factor.   For demanding applications, the Enhanced version CPS100E Models extend output frequency to 1200Hz and add a range of special features like IEC 61000-4-11, IEC 61000-4-13, IEC 61000-4-14 and IEC 61000-4-28 power immunity testing. Harmonics measurements and programmable output impedance are supported on enhanced models as well.   The CPS100 Series power sources are a reliable and cost effective solutions for all of your single phase AC power and DC power needs!

• Programmable AC, DC or AC+DC
• Dual Voltage Ranges (High/Low)
• Constant Power Mode voltage range from 72% to F.S.
• Programmable Frequency and start/stop phase angle
• Programmable Current and Power Limit Protection
• Intuitive Color Touch Screen for Front Panel Operation
• Total of 15 Measurement functions in one screen
• Low Voltage Distortion
• High Crest Factor and Peak Current Capability
• List, Pulse and Step Mode Transient capability for Line Distortion Simulation
• Sine Wave, Harmonic waveform library, User waveforms
• Enhanced version (E) models add:
  • IEC 61000-4-11, 4-13, 4-14 and 4-28 Tests
  • Programmable L and R output impedance
  • Pass/Fail Test Mode
  • Harmonic & THD Measurements for V and I
  • TRIAC dimmer mode
• USB, RS232, RS485 interfaces standard
• LAN or GPIB Option available
• CE Mark

AC and DC Test Power

The CPS100 Series Power Sources use state-of-the-art DSP technology to provide stable and accurate output, regardless of AC input line conditions. They can be programmed to supply a variety of AC, DC or a combination of AC and DC power conditions to the device under test and meter all output parameters.

Frequency/Voltage Conversion

The CPS100 Series is an excellent source of stable AC voltage over a frequency range of 15 to 1000 Hz (S version) or 15 to 1200 Hz (E version). Output voltages up to 300 Vac or 320 Vac and 424.2 Vdc are available.

Export/Import Product Development and Test

With the ability to provide any single phase voltage and frequency combination found around the world, the CPS100 Series is a great choice for evaluating AC power input supplies for worldwide use.

DC Testing

The CPS100 Series includes a DC output mode that allows for development or testing of DC powered products up to 424.2 Vdc. Current and power limit programming is available in DC mode as well.

Avionics Power

Whenever 400Hz or 800Hz, 115Vac single phase is required to power up shipboard or airborne equipment, the CPS100 can do the job. With up to 43.5 A of current available (Model CPS150), most single phase input equipment can be powered up for repair or test purposes. For 3 phase loads, three CPS100 power source (2kVA and higher models) can be configured in a 3-Phase master/slave configuration.